1/2" AC 110V Automatic Timed Water Tank 2-way Direct-acting Drain Valve US Plug with 10 Inch Braided Steel Hose 1/4 Inch NPT,Drain Valve and Elbow Fitting for Air Compressor

Product Description Color: black, yellow, silver, white, blue. Material: rubber, copper, steel, polytetrafluoroethylene, plastic. Details of the drain valve: Equipped with ball valve filter, split-type drain valve, L-shaped structure. Power supply voltage: AC 110V - 120V / 50Hz Time interval (off): 0.5 - 45 minutes (adjustable) Discharge time (ON): 0.5 - 10 seconds (adjustable) Manual test button available (micro switch) Current consumption: maximum 4mA Ambient temperature: -40°C to 60°C Protection level: IP65 Housing material: flame-retardant ABS plastic Electrical connection: DIN43650A Indicator light: LED, power on/off Type: two-way direct-acting valve Flow orifice diameter: 5 mm Insulation class: H Inlet and outlet port size: 1/2" Maximum working pressure: 1.6Mpa Maximum temperature: 90°C Valve material: forged brass Power cord length is approximately 1.8 meters (with US plug) The maximum working pressure is 175 pounds per square inch, the burst pressure is 475 pounds per square inch. The maximum temperature is 200°F. It has 1/4" NPT tapered pipe thread and can be connected to 1/4" NPT threaded pipe. It adopts a design with pre-applied thread sealant for easy connection of additional drain hoses or elbows. The overall length of the hose is 34cm, and it is approximately 25.4cm (10 inches) without joints. This drain kit is equipped with a roll of thread seal tape that can be used for interface sealing. Package includes: 1pcs × 110V air compressor air storage tank drain valve 1pcs × 10-inch-long (without joints) hose 1pcs × 1/4" NPT to 3/8" NPT brass adapter 1pcs × thread seal tape Note: The color of the item may vary slightly due to photography and your own computer

• Material: rubber, copper, steel, polytetrafluoroethylene, plastic.
• The maximum working pressure is 175 pounds per square inch, the burst pressure is 475 pounds per square inch. The maximum temperature is 200°F. It has 1/4" NPT tapered pipe thread and can be connected to 1/4" NPT threaded pipe.
• It adopts a design with pre-applied thread sealant for easy connection of additional drain hoses or elbows. The overall length of the hose is 34cm, and it is approximately 25.4cm (10 inches) without joints.
• Voltage: 110V; 1/4" NPT interface, and it can also be transferred with 3/8" NPT.
• Package includes:1pcs × 110V air compressor air storage tank drain valve, 1pcs × 10-inch-long (without joints) hose ,1pcs × 1/4" NPT to 3/8" NPT brass adapter ,1pcs × thread seal tape