7/8"-14 UNF Right Hand Straight Flute for HSS Thread Tap for Through Hole & Shallow Blind Hole Tapping, Compatible with for CNC Lathes, Machining Centers, Bench Drills, Tapping Machines

Product description Features: QualityMade of materials for durabilityStraight groove design for through hole and shallow blind hole tapping, not for blind hole tapping.It can be used in conjunction with manual equipment or special processing consoles, such as tapping machines, a bench drill, For CNC lathes, machining centers, .Control the speed according to the hardness of the material. The higher the hardness of the processed product, the slower the speed.Recommended feed speed: ordinary steel: 6-15m/min; hard steel: -10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.Product parameters:Size: 7/8&;-14 UNFMaterial: high speed steelOrientation: Right handCutting Diameter: 7/8&;, TPI: 14.Tap Length: 4.65&;/118mm, Thread Head Length: .06&;/27mm.Shank Diameter: 16.0mm, Square Head: 12.5mm x 12.5mm(L*W).hint:. Before tapping, confirm whether the diameter of the round hole is appropriate, and for take protective measures during work.2. When tapping, it is necessary to add water or coolant for cooling to the from being too high and reduce the loss of tapping. If the rotation is difficult, the tapping should be suspended.3. For the complex tapping process, be sure to choose the appropriate cutting oil, and apply anti-rust oil for maintenance after use.Package Included:* 7/8&;-14 UNF Right Hand Thread TapNote:.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your and light brightness.2.Please allow slight manual measurement deviation for the data. Manufacturer Contact Information Niceminiwall

• 7/8-14 UNF TAP: right-hand thread cutting for 7/8"–14 UNF fasteners in steel, stainless steel, and cast iron
• HIGH SPEED STEEL CONSTRUCTION: Long lasting performance under high-torque tapping with heat resistance up to 650°C
• STRAIGHT FLUTE DESIGN: Efficient chip removal for through holes and shallow blind holes—compatible with manual taps and For CNC lathes
• OPTIMIZED FEED SPEEDS: Recommended 2–15 m/min based on material hardness—insure consistent thread accuracy and tap life
• COOLANT COMPATIBLE: Apply water or cutting oil while tapping to avoid overheating and maintain superficies integrity