AT828 Handheld LCR Digital Meter 50Hz 100Hz 120Hz 1kHz 2kHz 10kHz 100KHz Accuracy 0.2%

AT828 digital bridge, a handheld precision testing instrument controlled by high-performance microprocessors for fully automatic real-time detection. The instrument uses true color TFT-LCD, with keyboard and touch screen operation, providing users with a new testing experience with high-precision measurement and simple usability. The instrument can provide a testing frequency of 100kHz (AT828) and a signal level of 0.3/0.7/1.0Vrms, automatically measuring inductance L, capacitance C, resistance value R, complex impedance Z, quality factor Q, loss tangent value D, phase, and can also measure DCR simultaneously. The display of 50000 primary and secondary parameters with an accuracy of 0.2% enables this instrument to meet the precise testing requirements of various component manufacturers, schools, research institutes, and metrological quality inspection departments, while also meeting the requirements of mass production. The instrument provides a tolerance mode sorting function and offers one set of main parameter percentage sorting. The entire instrument series comes standard with USB-HID and USB-VOM interfaces, which are compatible with SCPI (Standard Command for Programmable Instrument) through open computer remote control commands. Users can independently write computer software to efficiently complete remote control and data acquisition functions.

• High brightness, true color LCD display；Touch Screen；USB-HID communication；Correction function: Full range open circuit and short circuit sweep frequency reset.
• 1300mAh rechargeable lithium battery；Long working hours: 14 Hours (@ 30% brightness)
• Measurement Frequency：50Hz, 100Hz，120Hz，1kHz，2kHz，10kHz,100KHz;Accuracy:0.2%;Measurement Range:Automatic and manual
• Measurement Speed:Slow speed 2.5 times/second, fast speed 10 times/second;Source Resistance:100Ω;Display Reader:Main parameters: 50000 Sub parameters: 50000;Equivalent Circuit :Series connection, parallel connection;Signal Level:Accuracy of 0.3V, 0.7V, and 1.0Vrms: 10%;Trigger Mode:Internal;Protocol:SCPI
• Comparator Mode:SEQ/ABS/PER;Files:USB storage;Interface:USB-HID;Power Supply:input: 100-240V，50Hz, 0.35A, output:9V 1A DC