Car Key Fob Compatible with Dodge Charger| Durango| Magnum| Jeep Commander| Grand Cherokee| Chrysler 300| Aspen 2005 2006 2007 2008 2009 4 Buttons Keyless Entry Remote Clicker KOBDT04A OHT692427AA

Less pay for 2 keys than you would have pay the dealer Compatible with 2005-2007 Chrysler 300 2007-2009 Chrysler Aspen 2006-2007 Dodge Charger 2007-2009 Dodge Durango 2005-2007 Dodge Magnum 2006-2007 Jeep Commander 2005-2007 Jeep Grand Cherokee Note ●Please test key signal before program ●It's recommanded to get your key programmed and cut at qualified locksmiths or dealers. ●Self-program requires two original working key, if you only get 1 key, you should have your key programmed at qualified locksmiths or dealers. Program Instruction( e.g. for 2007 Jeep Grand Cherokee) 1. Insert the first valid key into the ignition switch. Turn the ignition switch to the ON/RUN position for at least three seconds, but no longer than 15 seconds. Then, Turn the ignition switch to the LOCK position and remove the first key. 2. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound. In addition, the Vehicle Security Light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key. 3. Insert the new key into the ignition switch. Turn the ignition switch to the ON/RUN position. within 60 seconds. After 10 seconds, a single chime will sound. In addition, the Vehicle Security Light will stop flashing. To indicate that programming is complete, the Vehicle Security Light will turn on again for seconds and then turn off.

• Replacement car key fob compatible with Chrysler 300 2005-2007| Aspen 2007-2009|Dodge Charger 2006-2007| Durango 2007-2009| Magnum 2005-2007| Jeep Commander 2006-2007| Grand Cherokee 2005-2007
• Each key fob comes with battery and all electronics. FCC ID: KOBDT04A, OHT692427AA; P/N: 05179512AA, 05170486AA, 56038749AD, 56038749AG, 05183349AA, 56038768AD, 56038768AG, 68004413AA, 05179514AA, 56038757AE, 56038757AH
• Self-program requires 2 working original keys. If you only have 1 key, you may get your key fob programmed at local locksmith or dealership. Key blade must be cut by a qualified locksmith or dealership
• Note: Make sure you car is equipped with original factory trunk unlock and panic function for the key to work. Please confirm your original key has same button combination and appearance, the remote key can not add features that were not included originally
• Each key remote is 100% fully tested before sending out. Should you have any queries or enquiries please email us