Fimco Manufacturing Inc. 1” 4 Outlet Mini Indexing Valve with 2,3, and 4 Zone Cams #9254, 1004

The model #9254 Hydro Indexing Valve has 1 inlet and 4 outlets which are all 1″ slip fit. This valve is recommended for use in a city water irrigation system and can run 2, 3, or 4 zones based on the chosen cam configuration. The standard flow stem and disc assembly requires a minimum of 10GPM. Please remember that pipe size is measured by inside diameter. This valve is made to accept 1″ pipe on the inlet and outlets. The outlets and inlet will be larger than the pipe size it receives.

• Valve is recommended for use in an irrigation system driven by city water
• Indexing valve can run from 2 to 4 zones based on the chosen cam configuration
• Valve has 4 outlets and 1 inlet that are all slip fit for 1" pipe. Please remember that pipe size is measured by inside diameter. This valve is made to accept 1″ pipe so the outlets and inlets will be larger than the pipe size it receives.
• 4 Zone cam is installed but comes with 2 and 3 zone cams
• Indexing valve can run from 2 to 4 zones based on the chosen cam configuration
• 10 PSI minimum pressure rating
• Anti-siphon valve (not included) is recommended and may be required for safe operation of the FIMCO hydro indexing valve on a city water installation
• Great alternative to individual solenoid valves with one valve replacing up to 4 individual solenoid valves
• 1 above ground valve controls all zones eliminating the need to dig into the ground to locate electric solenoid valve boxes
• Only use standard clear PVC cement (not included) when installing the valve and allow the valve 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in the construction of the indexing valve, purple primer has a similar effect and should only be applied to PVC pipe and never the valve housing