Flanged Bearings Solid Lubricating Bearing Bushing JDB081130 JDB081225 JDB081230 JDB081220 Bearings Industrial Products(JDB081215)

BearingPremium Flanged Ball Bearing.DemensionsType: JDB Solid Lubricating Baring Material: Tin-Plating Model Size Quantity JDB081130 8x11x30 mm 4 Pcs JDB081225 8x12x25 mm 4 Pcs JDB081230 8x12x30 mm 4 Pcs JDB081220 8x12x20 mm 4 Pcs JDB081215 8x12x15 mm 4 Pcs JDB081212 8x12x12 mm 4 Pcs JDB081210 8x12x10 mm 4 Pcs Caution1 Before assembly on the terms of lubricant applied to the grinding parts can be cut short walk in period is conducive to operation of machinery running;2 Clean the surface of the assembly when foreign body preferably refrigerated assembly such as unconditional they should slowly push non-beating to avoid harming the bearings and cause deformation;3 Face after use due to solid lubricant film lead to the formation of black or gray surface phenomenon. Do not scrub as usual;4 Working environment where corrosive or in water use the shaft is recommended the surface of stainless steel or chrome.Structure Characteristics and ApplicationsIt is backed with strengthening brass that has good physical performance and good capability for casting. What‘s more the brass backing has pretty good anti-erosion ability in air fresh water and seawater. The surface is regularly and finely machined with sockets in witch particular solid lubricant is filled. The Product is widely used on consecutive casting and rolling machines mine-exploiting equipment ships steam engine etc.

• Bearing
• Bearing Design
• Bearing Height: bearing diameter from the shaft the shaft is determined so by loading conditions load bearing by bearing a high pressure P (N/mm²) of the decision，
• usually bearing the L/D (bearing height/bearing diameter) the ratio in the range of 0.5-3 for the appropriate but should pay particular attention to the high load easy cause deviation contacts high-speed situations caused by heat then L/D is more appropriate to take the following 1.
• Bearing wall: plain bearings with rolling bearings compared to the wall thickness less restricted thin wall thickness of one of its main advantages.
• Under normal circumstances the wall thickness t= (0.05~0.07) d= (2~5) mm.