Reptile UVB Lamp Meter,UVB Tester for Reptile Heat Lamp with 2 Inch Digital Display,UVB Sensor

Describe: This Reptile UVB Lamp Meter is used for UVB testing of reptile heating lamps. Feature: 1 Measure specific values of UVB intensity at the following locations. Different UVB lamps at different distances. 2. Measure the effective UVB coverage of different UVB lamps and the UVB value at each point in the range. 3. Always measure the decay rate of all UVB lamps in use to remind you to replace UVB lamps with insufficient output in time. 4. Measure the outdoor sunlight in different seasons at any time. UVB intensity at different times, please use this reference to choose the right UV lamp for you. Or adjust the UV lamp in use to the best use condition Specification: Response spectrum: 280-320nm Peak spectrum: 300nm Measurement interval: 0-1999μW/cm2 Resolution: 1μW/cm² Response time: T≤0.5s Accuracy: ±10% Power source: AA batteries (not included in the package) Power consumption: ≤0.25W Weight: 125g Dimensions: 16.5*7.5*3CM/6.5*3*1.2IN Display: 3.5-digit LCD Notes: 1. Wear goggles when checking the UV lamp. 2. Warm up the lamp at least 5 minutes before taking a reading. 3. When checking the aging of lamps, keep the measurement distance and position unchanged. 4. The bulb should be replaced when the output has dropped to 30% to approximately 70% of the original (new) reading. Take an overall reading at the exposure distance, or examine individual lamps close to the surface. Track hours and readings on a chart. 5. If you are not sure what the original new value is, replace the bulb with a new bulb of the same type and compare it with the old bulb. 6. To get more accurate data, do multiple tests with the same distance and average. 7. Clean the instrument with a dry soft cloth. Keep the sensor free of oil, dirt, etc.

• Professional Reptile Heat Lamp Inspection Tool: The reptile UVB lamp meter is a compact handheld meter with easy button operation and traceable accuracy. Designed to test the UVB value of reptile heating lamps.
• High Accuracy: The UVB tester of this reptile heating lamp is sensitive, and the response time: T≤0.5s. High accuracy, accuracy: ±10%.
• Digital Display: This UVB Tester for Reptile has an LCD that can display the value of UVB irradiance. When the lamp output drops to 70% of the original reading, please replace it in time.
• Easy to Use: Just press and hold the button switch on the surface of the unit. Aim the sensor window in the top panel of the meter directly at the UV source. Note the reading on the LCD and record as needed. For more accurate data, run multiple tests with the same distance and average.
• Note: This Reptile Heat Lamp UVB inspection tool is powered by AA power (2*AA, not included), please replace the battery when the LCD reading starts to dim.